A high quality 12VDC switch-mode regulated power supply rated at 24 Watt maximum. The power
supply has a wide range 90-264vac 47/63Hz input for world use and features short circuit,
over voltage and over load current protection, some of these features are not found in more
affordable models.
Recommended for use with light to medium motorised and computerised telescopes. It comes
with a 2m mains UK type power lead with a total reach of 3m.
Specfication
Input
90-264VAC 47/63Hz via 2 pin C8
Output
12VDC 2A maximum, 24W
Plug
2.1mm pin (+ve) x 5.5mm x 12mm long
Safety Approvals
BSMI, CB, cUL, UL, GS, PSE
Efficiency
Meets Energy Efficiency Level IV & CEC
EMI
RCM, CE / FCC Class B Conduction & Radiation
MTBF
100,000 hours minimum at 25° C
The specification shown is correct at the time of writing.
Caution
Please ensure that the current required by the equipment connected to
any power supply is below the current output rating of the power supply used.
This will prolong the life of the equipment. As a rule of thumb you power
supply should supply 25% more current than is required by the device/s
connected to it for best performance.
Notice
We are constantly checking the accuracy of the technical data. We are prepared to provide
more detailed information on request. Technical data is subject to change without notice.
Read the latest review about the A&M 152mm f/8 A&M/TMB on
Cloudy Nights.
According to the review this telescope combines the "beauty of a Ferrari" with
"fantastic performance". The review also states that "the manufacturer's claims are valid".
We accept all the credit and debit cards shown above. Online payments are
cleared by Barclays. Online payment integration by Worldpay. Please read our
Terms & Conditions