Would you like to plug in a hand controller and a computer into the guide
port of your telescope at the same time? Then here is the device you need. Plug
this into your guide port. Plug your hand controller into one side. Then plug
the cable that goes to your guide port interface adapter into the other side. No
more need to unplug one controller when you want to use the other.
Plan ahead, on some mounts there is not enough clearance around the autoguide
port to plug this splitter in directly. In this case, use the
Guide Port Extension to avoid the problem.
Warning About Cables
The use of improperly wired cables with mounts can result in damage
to the electronics in the mount, as well as damage to the interface adapter.
The importance of using a properly wired cable cannot be stressed enough. If
you choose to make or buy your own from another source, please be sure it is
built per the description in the user manual.