Set of two collimating rings and Vixen/Skywatcher style dovetail with fitting screws to
mount a guide scope on standard mount saddles as found on the Sky-Watcher, Celestron CG-5, VX,
Opticstar, Vixen and other mounts.
The rings will accept tubes between 58mm-120mm in diameter with the supplied knobs. The
dovetail has a length of 160mm and comes with a 1/4" photographic thread at the centre of
its base. It is suitable for Vixen-style saddles including Sky-Watcher EQ3-2, EQ5, HEQ5, EQ6,
EQ6 PRO, NEQ6 PRO, Celestron CG-5 & VX, Opticstar EQ700, EG1300 GT etc.
Two sets of short and long threaded knobs are supplied for your convenience. The shorter
threaded knobs can be used with tubes of large diameter so that these do not protrude.