Meade Instruments:  
 » LX90 SCT & ACF Series. 
 » LX200 ACF Series. 
 » LXD75 ACF Series. 
 » ETX Computerised Telescopes. 
 » Lightbridge Dobsonian Telescopes. 
 » Premium Refractor Telescopes. Coronado Solar Telescopes: 
 » Personal Solar Telescopes. 
 » SolarMax II Telescopes. Opticstar sections: 
 » Cooled, long exposure cameras, 6.1MP CCD, USB 2.0. 
 » Video cameras for planetary use up to 1.3MP, USB 2.0. 
 » Imaging accessories. 
 » Auto-Guiding systems, complete solutions. Ascension telescopes and accessories: 
 » Apochromat ED Triplet Refractors 
 » Achromat Doublet Refractors  
 » Eyepieces including zoom eyepieces. 
 » Guiding eyepieces. 
 » Extension tubes. 
 » Flip mirrors. 
 » Imaging filters. 
 » Barlow lenses. 
 » Binoviewers. 
 » Red dot finders. 
 » Eyepiece projection kits. 
 » Mirror and prism diagonals. Starlight Xpress: 
 » Cooled CCD Cameras. 
 » Guide Cameras. 
 » Filter Wheels. Farpoint Astro: 
 » Dovetail systems and mount accessories. 
 » Focus masks. 
 » Binocular mountings. Willmann Bell books. Shoestring Astronomy sections: 
 » Autoguiding connectivity kits and interfaces. 
 » Shutter control units for DSLR cameras. 
 » Focus motor controllers.
Opticstar AG-131M COOLAIR
Advanced Auto-Guider includes: Video Camera, Interface Box, Cables and Software
Opticstar AG-131M COOLAIR Auto Guider.
The AG-131M COOLAIR includes the Opticstar PL-131M COOLAIR camera and the Shoestring GPUSB interface box.
  • Complete guiding solution for telescopes
  • For all mounts with a Guide Port (ST-4)
  • For all ASCOM compliant mounts
  • Also supports most non-ASCOM mounts
  • Max frame rate: 22 @ full res (WDM mode).
  • Max exposure time: 10 seconds (native mode).
  • Ideal for Planetary imaging
  • Air-Cooled with internal fan
  • Resolution: 1280 x 1024
  • Binning: 1x1, 2x2, 4x4
  • Region of Interest (ROI):
    • 640x480
    • 320x240
  • USB 2.0 Powered
  • Computer controlled
  • Contents:
    • 1.3mp Monochrome video camera
    • Computer-to-mount interface box
    • All cables
  • Bundled Software (max. 10s exposure):
    • Opticstar View (up to 220 FPS)
    • etAMCAP (up to 220 FPS)
    • PHD Guiding
    • Nebulosity Lite
    • Plug-in for MaxIm DL
    • Plug-in for AstroArt
  • Computer Requirements:
    • Microsoft Windows (32-bit & 64-bit) XP/Vista/7/8/10
    • USB 2.0 port
Opticstar PL-131 COOLAIR features.
A+ sensor. The Opticstar hand-selected hi-grade A+ sensor installed in this camera is noted for its uniform surface response and low noise required for low light applications.
Opticstar
CCD Cameras
CCD Cameras Opticstar
Accessories
CCD Camera
Accessories
Opticstar AG-131M COOLAIR
The AG-131M COOLAIR system comprises the following:
  • Opticstar PL-131M COOLAIR 1.3MP monochrome camera.
  • Shoestring GPUSB (USB version) auto-guide interface box with RJ-12 cable.
  • CS-mount to 1.25" telescope adaptor (threaded for filters).
  • USB 2.0 cable to connect camera to computer.
  • Printed set-up guide.
  • Software on CD:
    • Opticstar View for AVI and BMP capture.
    • etAMCAP for AVI capture.
    • PHD Guiding for auto-guiding.
    • Nebulosity Lite for image processing and stacking.
    • PL-131 Plugin for PHD Guiding
    • PL-131 Plugin for Nebulosity
    • PL-131 Plugin for MaxIm DL
    • PL-131 Plugin for AstroArt
Order No. Price (inc_VAT) Shipping Delivery click to purchase
OSRAG131MCA £ --- £ ---
Opticstar AG-131 Setup Guide
(July 2010, PDF)
Opticstar CCD Cameras
(Brochure, PDF)

Outline
The Opticstar AG-131M COOLAIR auto-guiding system includes everything you need to auto-guide any telescope with an ST-4 compatible port (this includes the vast majority of telescope mounts). A complete list of compatible mounts is included on this page. The AG-131M COOLAIR system includes the Shoestring GPUSB connectivity kit that interfaces the computer (USB 2.0 port) with the telescope mount (ST-4 port). All necessary cables are included.

The auto-guider system includes the Opticstar PL-131M COOLAIR monochrome video camera that connects to your computer's USB 2.0 port. For auto-guiding, the camera is software controlled by PHD Guiding that is included in the package. The telescope is also controlled by PHD Guiding. It is possible to use alternative auto-guiding software such as Guidemaster that is also included. There is also support for AstroArt and MaxIm DL. Both of these software packages can be used for auto-guiding and/or imaging. Plug-ins are included for both of them. Nebulosity Lite is also bundled with the AG-131M COOLAIR and it supports 2x2 binning, stacking and much more. Nebulosity Lite is well suited for image capture, lapse photography and basic image processing including frame stacking.
Cooling mechanism.
The cooling mechanism.
The maximum exposure time in PHD Guiding, Nebulosity, AstroArt and MaxIm DL is 10 seconds (in native mode). If maximum frame rates are required (22 F.P.S. at 1280x1024) then the camera can be used in Windows DirectShow/WDM mode.

Opticstar PL-131M COOLAIR Video Camera
The PL-131M COOLAIR is high-speed, a high-resolution 1.3 mega-pixel monochrome camera that is sensitive and can be used to capture images of the planets, Sun and Moon. The camera is very easy to use and provides a quality, low noise affordable solution for viewing or capturing high quality digital video from the telescope and recording it to your computer at a maximum 1.3 mega-pixel resolution. In order to purchase just the camera without the auto-guider accessories please visit the Opticstar PL-131M COOLAIR camera page.
There is no infra-red (IR) filter. The camera is cased in a robust metal body and can be connected to any telescope with a standard 1.25" drawtube.

A PC with a USB2.0 port running Windows XP/Vista/7/8/10 is required. The PL-131M COOLAIR is powered by the USB 2.0 port and therefore no power supply unit is required. The camera will operate at a maximum true resolution of 1280x1024 but lower resolutions of 1024x768, 640x480, 320x240 are also supported.

Auto-Guiding
In order to auto-guide with the AG-131M COOLAIR auto-guider system you will also need:
  • A telescope with an ST-4 (guide) port.
  • PC or laptop computer running Windows XP/Vista/7/8/10.
With the Guidemaster software provided, the computer can control your telescope mount and direct it's motion. Many telescopes come with a six pin port that looks like a phone jack. This is called an RJ-12 connector.

Typically, a hand controller is plugged into the ST-4 port. However with the AG-131M COOLAIR you can plug its RJ-12 cable to the hand controller which itself is connected to the mount. Depending on you telescope, you might have to plug the RJ-12 cable directly to the mount.

Either way, Guidemaster on your computer will control the telescope based on the image that it receives from the Opticstar PL-131M COOLAIR video camera (part of the AG-131M COOLAIR system).

The AG-131M COOLAIR system includes the Shoestring GPUSB interface box and needs a USB connection to your computer. If you do not want to plug it to a USB port, it is possible to replace the GPUSB interface box with a Parallel Port version, please see below.

Guidemaster user interface.
Guidemaster user interface.

Video Mode V Single Shot Mode
The PL-131M COOLAIR camera operates in two distinct modes. In video mode the camera will show as a DirectShow/WDM device and will produce very fast frame rates with exposures limited to under half a second. This mode is ideal for solar and planetary imaging as well as for 'training' telescope mounts. It can also be used for guiding with less dim stars.

The single shot mode supports longer exposures, in this mode a full frame is only sent to the computer once the exposure has been completed. This mode is ideal for guiding on dimmer targets. It is recommended that guiding exposures of around 1 second are used as this will even out any atmospheric turbulence, reveal fainter stars and improve guiding performance.

Opticstar PL-131M COOLAIR
The PL-131M COOLAIR high speed video camera.

Hardware Requirements
The PL-131M CoolAir camera requires a fully featured, full speed USB2.0 port to take advantage of all the camera’s advanced features. Fully featured USB2.0 ports are rare in older laptops and not always present in entry level laptops. PCMCIA/CardBus USB2.0 cards typically do not deliver full USB2.0 speeds and will not work with USB2.0 high resolution video cameras including the PL-131M CoolAir.

To resolve such issues an ExpressCard (with a USB2.0 port) could be used instead of a PCMCIA/CardBus card due to the ExpressCard's superior speed of 2.5Gbit/s (480 Mbit/s through USB 2.0) per slot.

Express type cards use a 34mm slot where PCMCIA/CardBus cards use 54mm slots. An ExpressCard should be connected directly to the computer and not via a PCMCIA/CardBus card.

Please note the ExpressCards will resolve USB related issues assuming that the laptop data bus can support full ExpressCard speeds and is fully implemented.

Computers with slower USB2.0 ports may still be able to capture at full resolution but may be able to only transfer a user selectable area (ROI 640x480 or 320x240) to the computer while sustaining image resolution and high frame rates. This does not have a real effect when imaging planets where video capture should ideally take place at the smallest ROI size possible, typically 320x240 @ 220fps for focal lengths to around 6 meters for planets like Jupiter or Saturn.

Always download and install the latest Windows and Direct X service packs.

Technical Details
The GPUSB guide port interface adapter plugs directly into a USB port on your computer or a USB hub attached to your computer. Using an RJ-12 cable, the adapter connects to the guide port of your telescope mount. This guide port interface uses optocouplers to electrically isolate the computer from the telescope, eliminating a possible source of electrical interference. This interface adapter requires no external power source since it receives its power via the USB cable. More information can be found in the user manual.

Auto-guiding with Guidemaster.
Auto-guiding with Guidemaster locked on nucleus of 73P-SW. Image by Matthias Garzarolli.

Warning About Cables
The use of improperly wired cables with mounts can result in damage to the electronics in the mount, as well as damage to the interface adapter. The importance of using a properly wired cable cannot be stressed enough. It is strongly recommended to use only the cables included in the package.

Connectivity diagram using one telescope.
Connectivity diagram using just one telescope for auto-guiding and imaging.

ASCOM Compatible
Shoestring Astronomy has developed an ASCOM driver for the GPUSB. Using this driver, any autoguide software package that supports the ASCOM standard will work with the GPUSB and hence the Opticstar AG-131M COOLAIR Auto-Guider System. Most telescope mounts are ASCOM compliant. Therefore even if you decide not to use Guidemaster but use an alternative auto-guiding software package, the chances are that it can still be made to work via the ASCOM software platform. Please follow these steps in order:
  1. Download and install the ASCOM platform from the ASCOM website.
  2. Install the Shoestring Astronomy's GPUSB ASCOM Driver for the GPUSB from the link above.
Connectivity diagram using two telescopes. One for auto-guiding and another for imaging.
Connectivity diagram using two telescopes. One for auto-guiding and another for imaging.

Missing A USB Port?
If your computer does not have a spare USB port but it has a parallel port, then you can use the Shoestring GPINT-PT Auto-Guider Kit that plugs directly to your computer's parallel port. Shoestring GPINT-PT.
GPINT-PT.
Telescope-Mount Support
Any ASCOM compatible mount with an ST-4 compatible autoguider port should work with AG-131 COOLAIR. Mounts tested so far include:
  • CG5 (requires Shoestring's Guide Port Conversion Kit)
  • EQ3 (requires Shoestring's Guide Port Conversion Kit)
  • EQ5 (requires Shoestring's Guide Port Conversion Kit)
  • EQ5 PRO SynScan
  • EQ6 PRO SkyScan via the hand controller
  • HEQ5 PRO SkyScan via the hand controller
  • Vixen SPHINX
  • Vixen GPDX via SkySensor 2000 (requires Shoestring's SkySensor 2000 converter)
  • Vixen Altux via SkySensor 2000 (requires Shoestring's SkySensor 2000 converter)
  • Losmandy GM-8 or G-11, without the Gemini box.
  • Losmandy GM-8 or G-11, with new-style Gemini box (circular DIN connects to connect motors).
  • Takahashi EM-10 (requires Shoestring's Guide Port Converter for Takahashi mounts)
  • Meade LX-200.
  • Meade LX-90.
  • Celestron Nexstar i-series.
  • Celestron Celestar 8.
  • Celestron Advanced Series GoTo.
  • Celestron CGE.
  • Orion Atlas EQ-G style.
  • Gemini G-41.
  • Astro-Physics AP900 QMD.
  • JMI NGT.
  • Tom O. Equatorial Platform.
With modification, you can also add an ST-4 compatible autoguide port to your EQ style mount. See the Guide Port Conversion Kit for details.

Guided Images
Please click on the images below to expand to their full size.
Sample image. Sample image.
M101 galaxy.
Image by Roy Hollister, United Kingdom
Guided with AG-130M.
Click to expand to: 806 x 527 pixels.

M51 galaxy.
Image by Roy Hollister, United Kingdom
Guided with AG-130M.
Click to expand to: 867 x 577 pixels.



Auto-guiding with Guidemaster.
Long exposure image in sharp focus due to auto-guiding with Guidemaster. Image by John Haunton.

PL-131 COOLAIR Sample Images
Please click on the images below to expand to their full size.
Sample image. Sample image.
Jupiter by Lee Renshaw, England.
PL-131C, Meade LX90 8 ACF.
Click to enlarge.

The Moon by Sathya Kumar Prasanna, India.
PL-131M, Newtonian 200mm.
Click to enlarge.

Sample image. Sample image.
The Sun by Tom Wakefield, England.
PL-131C, Coronado SolarMax II 60.
Click to enlarge.

The Sun by Tom Wakefield, England.
PL-131C, Coronado SolarMax II 60.
Click to enlarge.

Sample image. Sample image.
The Sun by Tom Wakefield, England.
PL-131C, Coronado SolarMax II 60.
Click to enlarge.

The Sun by Gary Palmer.
PL-131C, Coronado SolarMax II.
Click to enlarge to 1231x1004 pixels.

Sample image. Sample image.
The Sun by Gary Palmer.
PL-131C, Coronado SolarMax II.
Click to enlarge to 1203x859 pixels.

Jupiter and Jovian moon.
Captured by Naoki Yokoo, Japan.
PL-131C, Maksutov 150mm.
2X achromatic barlow lens.
Click to expand to full size.

Sample image. Sample image.
The Sun.
Captured by Naoki Yokoo, Japan.
PL-131C, P.S.T.
2X achromatic barlow lens(only using the cell).
Click to expand to full size.

The Moon.
Captured by Naoki Yokoo, Japan.
PL-131M, Maksutov 150mm.
Meade TeleXtender 3X.
Click to expand to full size.

Sample image. Sample image.
Jupiter and Jovian moon.
Captured by Naoki Yokoo, Japan.
PL-131M, Maksutov 150mm.
Meade TeleXtender 3X.
Click to expand to full size.

The Sun.
Captured by Naoki Yokoo, Japan.
PL-131C, P.S.T.
Meade TeleXtender 3X.
Click to expand to full size.

Sample image. Sample image.
Jupiter and Jovian moon.
Captured by Naoki Yokoo, Japan.
PL-131C, achromatic refractor 90mm.
Meade TeleXtender 5X.
Click to expand to full size.

Jupiter and Jovian moon.
Captured by Mike Garbett, United Kingdom.
PL-131C, 12" Dobsonian.
Click to expand to full size.



System Testing With GPUSBCheck
GPUSBCheck is a simple, free software application by ShoeString Astronomy that you can use to verify that your GPUSB, computer, and scope mount are all together working properly. You can download this using the link above. You should use this the first time you set up your system. You can also use it as a debugging tool anytime your system is not functioning properly. If your system works fine with GPUSBCheck, but not with your third-party software, then the problem most likely lies with the third-party software and you should contact them for technical support. If your system does not work with GPUSBCheck, then you should contact Shoestring Astronomy for technical support.

MaxIm DL & AstroArt Support
AstroArt and MaxIm DL are powerful third party applications for astronomy. They provide camera control, telescope control, auto-guiding and image processing. The camera can be used with both applications in Windows DirectShow/WDM mode for short exposures of under half a second, or in native PL-131 mode for exposures of up to 10 seconds. Longer exposures increase the camera's sensitivity. To install the plug-ins for native camera please download and read the PDF documents below. You may also want to download the full user guide from the link above titled "Opticstar AG-131 Setup Guide" for more instructions.

Nebulosity and Nebulosity Lite Software
Nebulosity supports direct control of the PL-131M COOLAIR camera and it provides a complete software solution for image capture and processing. Nebulosity is also available for free for all AG-131 COOLAIR and PL-131 COOLAIR users in Lite mode. There is only one edition of Nebulosity but we supply a serial number that upon registration enables the software to run in Lite mode.

Serial number for Nebulosity Lite mode: 05130

If you already have a full licence then the camera can be used with all Nebulosity features enabled. All software updates are provided as free downloads. You may also want to download the full user guide from the link above titled "Opticstar AG-131 Setup Guide" for more instructions.

PHD Guiding Software
PHD Guiding is designed to be simple, yet provide powerful, intelligent auto-guiding of your telescope. Connect your mount, your camera, select a star, and start guiding. That's it! In PHD Guiding, all calibration is taken care of automatically. The camera can be used with PHD Guiding in Windows DirectShow/WDM mode when exposures of under half a second are required, or in native PL-131 mode for exposures of up to 10 seconds. Longer exposures greatly increase the camera’s sensitivity.



Other 3rd Party Software for Telescope Control
The Shoestring GPUSB guiding kit (part of the Opticstar AG-131M COOLAIR system) is currently supported by the following software applications. The bundled Guidemaster auto-guider control sofware if provided at no cost with the compliments of its author, Matthias Garzarolli.
Software Application Shoestring GPINT-PT Shoestring GPUSB
(supplied here)
GuideDog by barkoSoftware Yes Yes (via ASCOM)
MaxIm Essenstials by Diffraction Limited Yes Yes (via ASCOM)
MaxIm DL by Diffraction Limited Yes Yes (v 4.52)
MaxDSLR by Diffraction Limited Yes Yes (v 4.02)
AstroArt by MSB Software Yes Yes
K3CCDTools by K3 Yes Yes (v 3.00)
Guidemaster by Matthias Garzarolli Yes Yes
AstroVideo by COAA Yes no
MetaGuide by Frank Freestar8n Yes Yes
PHDGuiding by Craig Stark Yes Yes (natively or ASCOM)
Autostar/Envisage at Guidestar LX200 Emulator Yes Yes
Astro IIDC (Macintosh) by ASC no Yes
Equinox (Macintosh) by Equinox no Yes


Notice
We are constantly checking the accuracy of the technical data. We are prepared to provide more detailed information on request. Technical data is subject to change without notice.

How To Order Terms & Conditions Email Us
Product Search

Opticstar News
New DS-616C XL+ Model
posted: 24th August 2017
Opticstar DS-616C XL+.
Star product, improved.

The new Opticstar DS-616C XL+ deep-sky CCD is the successor to the popular DS-616C XL that earned the annual star product award back in 2013. It maintains all the features of the original model as well as other improvements.


DS-616C XL is Astronomy Magazine's Star Product
posted: 12th September 2013
Opticstar DS-616C XL is Astronomy magazine's product of the year.
Star product.

The Opticstar DS-616C XL deep-sky CCD camera has earned the annual star product award from Astronomy, the world's best-selling astronomy magazine. Read about it in the September 2013 issue.

Online Shopping
Credit & Debit Cards
updated: 22nd August 2017
Online shopping.
We accept all the credit and debit cards shown above. Online payments are cleared by Barclays. Online payment integration by Worldpay. Please read our
Terms & Conditions

Willmann Bell
Books for Astronomy
updated: 28th October 2018
Willman Bell books.
Acclaimed books from Willmann Bell...
more
Opticstar News
Imaging Brochure
updated: 10th February 2014
Opticstar brochure.
Download the Opticstar imaging catalogue here.
more
Articles
CCD Temperature And Dark Current Correction
Dark current.
An important step in CCD image calibration is the...
more
A&M 152mm f/8 Review
"Fantastic Performance" "Beauty of a Ferrari"
updated: 25th March 2009
A&M 152mm f/8 TMB.
Read the latest review about the A&M 152mm f/8 A&M/TMB on Cloudy Nights. According to the review this telescope combines the "beauty of a Ferrari" with "fantastic performance". The review also states that "the manufacturer's claims are valid".
Feedback
We want to hear your comments.
contact
© Opticstar Ltd 2018